All Categories

HS736 — Wi-Fi Floor-Heating Thermostat HS736

  • Overview
  • Recommended Products

Product Overview

HS736 — Wi-Fi Floor-Heating Thermostat HS736

Model: Model: HS736 |Category:Category: HVAC

The TAOS HS736 is a wi-fi floor-heating thermostat engineered by Zhejiang TAOS Electric (est. 2000) for the HVAC segment of the Smart Home portfolio. It is designed for Tuya / Zigbee 3.0 ecosystems, supports Alexa & Google Home voice control, and complies with CE, RoHS, FCC, IEC 62368-1 and the Tuya Develop certification programme. Listed for export to 30+ countries across the Middle East, Africa, Europe and Southeast Asia.

Why Specify HS736?

Four engineering decisions that turn this device into a project-grade specification.

Ground-up commercial focus

Designed for FCU and VRF integrators, not retrofitted from a residential thermostat — Modbus, dry-contact and 0–10 V on-board.

BMS and Matter at once

RS485 Modbus for legacy BMS, Matter for future-proofing, in a single SKU.

±0.5 °C stability

High-resolution NTC pair plus PI control loop keep guest comfort tight — measurable on TripAdvisor scores.

Hospitality-tuned UI

Glass touch face with welcome-mode, do-not-disturb and SOS scenes built in — no firmware customisation needed.

Detailed Specifications

Datasheet excerpts — full datasheet PDF available on request.

Parameter

Value

Model

HS736

Application

Electric floor heating

Display

OLED 0.96"

Max load

16 A

Protocol

Wi-Fi 2.4 GHz

Power

AC 100–240 V

Certifications & Compliance

Authoritativeness signals — independent third-party verification of every test marked above.

CE.png

CE Marking (EU)

EN 60669-1 / EMC Directive 2014/30/EU

UKCA.jpg

UKCA

BS1363, UK market

SQM.jpg

SASO / SQM (Saudi Arabia)

SABER-registered for KSA customs clearance

CE.png

SONCAP (Nigeria)

Standards Organisation of Nigeria Conformity Assessment

GCC.jpg

GCC / G-mark

Gulf Cooperation Council

ECAS.jpg

ECAS

UAE market

ROHS.jpg

RoHS 2.0

Free of lead, cadmium, mercury, hexavalent chromium

图片1.png

CB Scheme

IECEE certificate, fast-track recognition in 50+ countries

Typical Application Scenarios

•see scene image: HS736-hvac-home-office-floor-heat.png
Hvac Home Office Floor Heat

•see scene image: HS736-hvac-home-office-floor-heat.png

see scene image: HS736-hvac-kitchen-warm-tile.png
Hvac Kitchen Warm Tile

see scene image: HS736-hvac-kitchen-warm-tile.png

• see scene image: HS736-hvac-walk-in-shower-warm-floor.png
Hvac Walk In Shower Warm Floor

• see scene image: HS736-hvac-walk-in-shower-warm-floor.png

Frequently Asked Questions

Q: Which HVAC systems are compatible?
Fan-coil units (FCU), VRF/VRV, gas/electric heating, central A/C and floor-heating loops via dry contacts. See the wiring page in each manual.
Q: Does it support 2-pipe / 4-pipe FCU?
Yes, configurable via the app with up to 4 stages cooling/heating.
Q: Can it be tied into a BMS?
Yes — Modbus RTU (RS485) or Modbus TCP gateway optional; KNX retrofit available on request.
Q: What temperature accuracy is delivered?
±0.5 °C with internal NTC sensor; external sensor input is supported on selected SKUs for floor-temperature feedback.
Q: Can multiple thermostats be linked?
Yes, via the TAOS gateway you can group up to 32 zones with master/slave logic.
Q: Does it remember settings after a power outage?
Yes, last setpoints + mode are written to non-volatile memory and resumed automatically.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000